The earliest knives were shaped by knapping (percussive flaking) of rock, particularly harder rocks such as obsidian and flint. During the Paleolithic era Homo habilis likely made similar tools out of wood, bone, and similar perishable materials that have not survived. As recent as five thousand years ago, as advances in metallurgy progressed, stone, wood, and bone blades were gradually succeeded by copper, bronze, iron, and eventually steel. The first metal (copper) knives were symmetrical double edged daggers, which copied the earlier flint daggers. In Europe the first single edged knives appeared during the middle bronze age. Modern knives may be made from many different materials such as alloy tool steels, carbon fiber, ceramics, and titanium.
Materials and construction
Today, knives come in many forms but can be generally categorized between two broad types: fixed blade knives and folding or pocket knives.
Characteristic Parts of the Knife
Modern knives consist of a blade (1) and handle (2). The blade edge can be plain or serrated or a combination of both. The handle, used to grip and manipulate the blade safely, may include the tang, a portion of the blade that extends into the handle. Knives are made with partial (extending part way into the handle, known as a "Stick Tang") and full (extending the full length of the handle, often visible on top and bottom) tangs. The handle can also include a bolster, which is a piece of material used to balance the knife, usually brass or other metal, at the front of the handle where it meets the blade. The blade consists of the point (3), the end of the knife used for piercing, the edge (4), the cutting surface of the knife extending from the point to the heel, the grind (5), the cross-section shape of the blade, the spine, (6), the top, thicker portion of the blade, the fuller (7), the groove added to lighted the blade, and the ricasso (8), the thick portion of the blade joining the blade and the handle. The guard (9) is a barrier between the blade and the handle which protects the hand from an opponent, or the blade of the knife itself. A choil, where the blade is unsharpened and possibly indented as it meets the handle, may be used to prevent scratches to the handle when sharpening or as a forward-finger grip. The end of the handle, or butt (10), may allow a lanyard (11), used to secure the knife to the wrist, or a portion of the tang to protrude as a striking surface for pounding or glass breaking.
Blade
Knife blades can be manufactured from a variety of materials, each of which has advantages and disadvantages. Carbon steel, an alloy of iron and carbon, can be very sharp, hold its edge well, and remain easy to sharpen, but is vulnerable to rust and stains. Stainless steel is an alloy of iron, chromium, possibly nickel, and molybdenum, with only a small amount of carbon. It is not able to take quite as sharp and edge as carbon steel, but is highly resistant to corrosion. High carbon stainless steel is stainless steel with a higher amount of carbon, intended to incorporate the better attributes of carbon steel and stainless steel. High carbon stainless steel blades do not discolor or stain, and maintain a sharp edge. Laminate blades use multiple metals to create a layered sandwich, combining the attributes of both. For example, a harder, more brittle steel may be sandwiched between an outer layer of softer, tougher, stainless steel to reduce vulnerability to corrosion. In this case, however, the part most affected by corrosion, the edge, is still vulnerable. Pattern-welding is similar to lamimate construction. Layers of different steel types are welded together, but then the stock is manipulated to create patterns in the steel. Titanium is metal that has a better strength-to-weight ratio, is more wear resistant, and more flexible than steel. Although less hard and unable to take as sharp an edge, carbides in the titanium alloy allow them to be heat-treated to a sufficient hardness. Ceramic blades are hard, and brittle, and lightweight: they may maintain a sharp edge for years with no maintenance at all. They are immune to common corrosion, and can only be sharpened on silicon carbide sandpaper and some grinding wheels. Plastic blades are not especially sharp and typically serrated. They are often disposable.
